Precautions for Caulking Gun

The glass rubber gun is convenient for our glue, but the rubber gun is prematurely damaged during the use of unwavering.

1. The connected air pressure should not be greater than 145PSI.

2. Before disassembling the rubber gun, you need to separate the pneumatic tube.

3. To go smoothly, after each construction, the solvent proposed by the sealing plastic manufacturer is used to erase the remaining seal in the barrel. (Do not allow the rubber gun to soak in the solvent)

4. During construction, the front end of the barrel should be closed tightly.

5. After the construction, please put the rubber gun lightly and carefully damage the front cover and the back -end muffler.

6. Do not point the muzzle at the person.

7. During the continuous work, the time stop time of the rubber gun should not exceed 5 minutes each time, otherwise, the glue should be exhausted until the gum is discharged.

8. The high -pressure rubber tube must not be forcibly squeezed and bent to prevent the normal work of the rubber gun.